Chuwi Hi 10 Windows Update

The Instruction to flash Windows 10 for CHUWI Hi10 /Általános instrukciók Hi 10

Szükséges eszközök /Prepared Tools:

 

8GB USB Flash Disk, USB-OTG Cable, HUB (over 3 interfaces) and the USB keyboard :

(2 USB flash disks)+ (a piece of OTG) + (HUB) + (1 keyboard)

How to find the serial number of the tablet? / Hol található a szériaszám?
It is at the back of the tablet as follows:

Tips:

  • The tablet is in off mode and its battery level must be guaranteed over 50%. (Táblet kikapcsolása, legalább 50% accu töltöttségi szint)
  • Close the antivirus software before unzipping the image files to avoid the apps in files are deleted. (vírusírtó szoftverek kikapcsolása az image fájl kicsomagolása előtt)

 

Első lépések:
A gyári Windows (Cuwi Brand) telepítéséhez, két usb pen sükséges. Az elsőt NTFS, a másikat FAT+”-re kell formázni.
Mindkettő meghajtót át kell nevezni WINPE névre.
A Fat 32-re formázott meghajtó gyökerébe kell másolni az összes fájlt a letöltött zip fájl kitömörített mappájából azimagesmappa kivételével.
Utóbbi mappát a másik NTFS-re formázott pendrive gyökérbe másoljuk. Ezzel mind kettő kész.
The first step:
Format the first USB flash disk that is made the startup disk into the format of FAT32, rename it as “WINPE”;
  • Format the second USB flash disk into the format of NTFS, rename it as “WINPE”.
  • Unzip the image files downloaded.

The second step:

Copy the unzipped Windows image files into the Root directory of the USB flash disk as follows:
 
 
  • copy 7 files of the USB1 into the first USB flash disk formatted as FAT32:

 

  • copy the “images” file of the USB2 into the second USB flash disk formatted as NTFS:

The third step:

The tablet connects Hub. Put the USB flash disk into the Hub, and then plug the Hub in keyboard as the picture shows:

put the second USB flash disk with NTFS format into the HUB;

The ports in the hub are in order.
The first USB flash disk should be put into the port firstly.
Please press the power button of the tablet and simultaneously click “F7” of the keyboard continuously to enter the boot mode.
And then put the second USB flash disk with NTFS format into the HUB.
Choose the first row “UEFI: SanDisk SanDisk Ultra PMAP, Partition 1” to flash the system automatically.

 

 

Press “Enter” button to program. When the programming is finished, the tablet will shut off automatically as follows:

 

 

The last step:

The tablet will automatically shutdown when completed;
The programming will last about 5 to 10 minutes; the precise time is dependent of Hub and U disk. The introduction is on basis of using the U disk 3.0. The programming lasts about 5 minutes

 

Attention
To flash windows 10 is risky, please follow the tutorial above; Any questions, please feel free to contact me or email to [email protected].

Download Tutorial:
https://mega.nz/#!hswjHR7C!pUYWsnx5dYwjNGbMHhQuAXW4kPZX8WUTzt1SVodZApA
Forrás: Chuwi Fórum

Hasonló bejegyzések

Copyright © 2018 Itws hUNGARY.HU sz.a.e.v.